Mas magaling ang SeeClickFix kasama ang mga kalapitbahay
Imbitahan ang iyong mga kapitbahay at kaibigan na gamitin ang SeeClickFix upang sila ay makapagpahayag, makaboto at makapagkomento tungkol sa mga isyu sa inyong lugar at lungsod.
Thanks for reporting this. It would be helpful to everyone in New Haven to categorize ADA violations as Accessibility for Persons with Disabilities issues - because -
The Feds put basic, common-sense public safety requirements into the ADA so basic, common-sense public safety is required by Federal law. It's not all about wheelchairs and ramps.
302.1 General. Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 302.
303.2 Vertical. Changes in level of 1/4 inch (6.4 mm) high maximum shall be permitted to be vertical.
303.3 Beveled. Changes in level between 1/4 inch (6.4 mm) high minimum and 1/2 inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
303.4 Ramps. Changes in level greater than 1/2 inch (13 mm) high shall be ramped, and shall comply with 405 or 406.
2 Komentos
revolutionizetransportation (Rehistradong User)
David Agosta (Rehistradong User)
Thanks for reporting this. It would be helpful to everyone in New Haven to categorize ADA violations as Accessibility for Persons with Disabilities issues - because -
The Feds put basic, common-sense public safety requirements into the ADA so basic, common-sense public safety is required by Federal law. It's not all about wheelchairs and ramps.
302.1 General. Floor and ground surfaces shall be stable, firm, and slip resistant and shall comply with 302.
303.2 Vertical. Changes in level of 1/4 inch (6.4 mm) high maximum shall be permitted to be vertical.
303.3 Beveled. Changes in level between 1/4 inch (6.4 mm) high minimum and 1/2 inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
303.4 Ramps. Changes in level greater than 1/2 inch (13 mm) high shall be ramped, and shall comply with 405 or 406.